Important Notes:
- The actual software file .tar.gz and operational parameters file .conf must be extracted from the downloaded .Zip files. MetCam does not accept .Zip files!
- Installation order: First install the software file .tar.gz, then install the parameters file .conf
How to extract the firmware files:
- Using File Explorer: Double-click the downloaded .zip file. Then copy the extracted .tar.gz and .conf files to the desired folder.
- Using Right-Click Menu: Right-click the downloaded .zip file. Then select extract here to extract to the current folder, or extract all to choose a different location
How to Install the firmware files:
- Firmware Installation:
- From the main MetCam web page, navigate to Configuration -> Firmware Update.
- Press Choose File and click the downloaded .tar.gz file.
- Wait until the file is successfully loaded.
- Navigate to Configuration -> Process Control and click Reboot
- Wait 2 minutes for the system to restart and sign back in
- Parameters:
- From the main MetCam web page, navigate to Settings -> Parameters.
- In the Parameters Update section, Press Choose File and click the downloaded .conf file.
- Wait until the file is successfully loaded.
- Close the web page and reopen it. Navigate to Settings -> Parameters.
- Under Parameters Description check the the parameters file is updated